Apple Food Systems – Lobe Pumps

Lobe Pumping Systems

Clean in place option: Less parts to strip and clean means less damage to machine parts while cleaning and fewer lost seals, ‘O’ rings etc and quicker machine turn round time.

To clean, remove hopper and outlet, connect to C.I.P. system and turn on, system will clean while hopper and outlet are manually cleaned.

H.M.I. Screen with recipe selection: All recipes can be saved and recalled at will, i.e fill speed, weight, product specific gravity, suck-back etc. Each recipe can be calibrated for the S.G. of that particular product and saved. All settings relevant to the recipe can be saved.

This means on selection of that recipe the pump will deposit the correct weight after approximately the second deposit and set up time is reduced because of this. Screen data can be password protected to prevent unwanted operator interference.

Technical Information

Faster Production: Because the pump is a positive pressure system you can fill the second tray virtually instantaneously (a piston pump needs to recharge its cylinder before it can do a second deposit). This gives a faster fill rate.

Better Presentation: The pump speed is fully controllable, therefore the product can easily be deposited along the length of the product. With varying weights being deposited in the same tray, we can cover the same target area by speeding up or slowing down the pump speed to suit.

The Following Products can be Deposited:

Batters

Syrups

Yogurt

Creamed Potato

Jams

Mayonnaise

Custard

Sauces

Oils

Sponge Mixes

Jelly

Butter

Creams

Chocolate

Pastes

Grease

Fondant

Downloads

Spec Sheet

Make an Enquiry

Use the form below to contact us with any questions you might have about Apple Food Systems. Alternatively, you can also call us on the number below

CALL 01302 340742

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.

Latest News